<-- -->

RP-300 4m Log Cutter & Splitter

RP-300 Cutting and Splitting Wood Processor

The WOODPECKER RP-300 4m Cutting and Splitting Wood Processor  is designed for cutting and splitting tree trunks with a diameter of up to  20  cm. The processor has hydraulic feed rollers with adjustable feed, thanks to which you can obtain pieces of wood with a length of  20  to  50  cm.

The processor is equipped with a safety switch and covers to ensure safe operation. It  has a system for withdrawing material from the feed hopper. The device is equipped with a 3 m long belt conveyor for discharging the processed material. The processor is characterized by high efficiency and high comfort of work. The obtained pieces of wood work great as fuel.

The drive of the processor is transmitted through the power transmission shaft of the tractor’s PTO shaft (right-hand rotation). We recommend using power transmission shafts equipped with a shear pin clutch (available in our offer). If the machine is overloaded, the pin is sheared and the drive is disconnected.

TECHNICAL SPECIFICATIONS
Minimum/recommended power                        55/80 HP
Max. branch cutting diameter (fresh soft wood)                        200mm                  European Timber
Max. branch cutting diameter (fresh hardwood)                        190mm                                 “
Max. branch cutting diameter (dry hardwood)                        180mm                                 “
Weight                        900 kg
Recommended PTO shaft revolutions                        300-500 rpm
Making cutting knives                        Wear-resistant steel with increased hardness
Chipper mounting system                        Three-point linkage system
Length/width of the tape                        300/40 cm or 400/40 cm